Roller Bush
They are most common types of bushes. They are pressed interference fit in the bush plates. Used for batch production. Have long working life.
Order Example:
Product specification with diagram print.
Renewable slip Bush
Used for continuous or large batch production. It is used when the bush wear is more, and it need to be replaced frequently. Headed or flanged bush. It can only be taken out of liner bush by removing the retaining screw. Flat is provided on the collar to prevent rotation and axial movement of the bush. The flat arrests with the collar of the retainer shoulder screw.
Order Example: SF-32-16-.2036Download Brochure
Headless Press Fit Bush
They are most common types of bushes. They are pressed interference fit in the bush plates. Used for batch production. Have long working life. They are also used as liner for slip and renewable bushes. Types of press fit bushes o Headed Bush o Headless Bush Headed collared press fit bush.
Order Example: P48-24 -1/2 PM10-10 6.00MM(METRIC)Download Brochure
Long Bushing
Special bushes are used for awkward workpiece. A drill bush is shaped to prevent drill run due to the sloping workpiece face.
Order Example: Product specification with diagram print.Download Brochure
Headless Linear Bushing
Headlinear bush is used where the hole depth is not needed to be controlled and not important. When spacing of the bush is close or the top surface of the jig plate is required to be free from the projecting collars, headless bushes are used.
Order Example: P48-24 -1/2 PM10-10 6.00MM(METRIC)Download Brochure
Headed Bush
Headed bush are used to control hole depth. The collar of the bush provides positive stop against the jig plate. The collar also prevents axial movement of the bush with the drill. The bush is either placed close to the workpiece or far enough away from the workpiece to permit swarf to escape between it and the workpiece. Headed drill bushes are provided with seating of the bush in the hole in the drill plate and undercutting the head of the bush. A lead is provided for easy entry of the bush in the drill plate
Order Example: H-40-8-3/8 HM-18-20-11.00MM(Metric)Download Brochure
Fixture Locating Bushing
Special bushes are used for awkward workpiece. A drill bush is shaped to prevent drill run due to the sloping workpiece face.
Order Example: Product specification with diagram print.Download Brochure
Headed Bush
Headed bush are used to control hole depth. The collar of the bush provides positive stop against the jig plate. The collar also prevents axial movement of the bush with the drill. The bush is either placed close to the workpiece or far enough away from the workpiece to permit swarf to escape between it and the workpiece. Headed drill bushes are provided with seating of the bush in the hole in the drill plate and undercutting the head of the bush. A lead is provided for easy entry of the bush in the drill plate
Order Example:
H-40-8-3/8
Download Brochure
Renewable Slip/Fixed Bush
Used for continuous or large batch production. It is used when the bush wear is more, and it need to be replaced frequently. Headed or flanged bush. It can only be taken out of liner bush by removing the retaining screw. Flat is provided on the collar to prevent rotation and axial movement of the bush. The flat arrests with the collar of the retainer shoulder screw.
Order Example:
SF-32-16-.2036